PDA

View Full Version : Whats goin on everyone


4DRSALOON
02-22-2009, 02:47 AM
Hey guys this is Nathan Myers. Ive been in the dsm game since I was 14. My first dsm was a 93 Talon 1.8 liter single cam FTW!!!. Then I bought a 95 talon n/a and that got old fast. I moved on to bigger and better things when I sold that heap and got a black 99 gsx. That was my baby until I started breakin parts left and right. I ended up selling that car to a dsmer in Canada. Now I have a 06 Evo SE. It's pretty much stock with some bolt ons. This past summer we were able to make 360 hp and 390 ft lbs with a full exhaust, cone filter, and boost controller. I took it to the track and unfortunately it still had the stock clutch and wouldnt launch for nothing. So pretty much rolling it off the line it went 12.80's @ 113. Im pretty excited for this season I got a cusco twin disc, tubular mani, sheet metal 02 housing, ETS FMIC, Tial bov, and some other goodies. Dropped a ton of weight out like taking everything out of the trunk, both front and rear bumper supports, and instead of the junk stock heavy battery i got a 15 lb cf braille. Im hoping to get into the low 11's high 10's stock turbo and stock motor ( might have to drop some fp4r cams in tho later this summer) . Ill get some pics up soon as I get the goodies.

1320Addict
02-23-2009, 04:35 AM
Hey, Welcome to Evo-Tech. Good luck on your goals and keep us updated.

Mysterio
02-23-2009, 08:28 PM
welcome to the board!

4DRSALOON
02-23-2009, 09:25 PM
Thanx guys, Ill def keep everyone posted on the status and mods as it happens. I have alot of things coming, so I should have some pics up soon. Cant wait to get it to the track tho, with help from Nate Silver and Curt Brown it should a decently fast stock turbo car

Erik@JNZTuning
02-24-2009, 04:12 PM
Sounds like you are already a pretty fast stock turbo car. :)

4DRSALOON
02-24-2009, 11:22 PM
Its not to bad. It did make pretty good power for pretty much bone stock everything. Im hoping to get into the 400 hp range and run some good times with it before I start the real project ( custom top mount 3586hta). We are goin to start making the manifold this weekend but unfortunatelty i dont quite have the money for all that comes with a 3586 so im holding off and for the time being just seeing what we can do on a stock turbo. Ill let you guys know when we start the manifold and post up some pics, it should come out pretty nice.