New chic

[girlieracr4g63]

Hi guys just figured I drop in and say hello, and that I love the site so far. My name is Wendy, and I have been into DSM's for several years now. Currently I have a GVR 4 as a daily driver, and am in the process of getting my 91 GST back together. I have been out of the actual racing scene for a couple of years. However, now I am back and looking forward to getting the GST into the 10's on an Evo16g. I am a huge fan of small turbo's and pushing them to their max. Fighting for traction all the while. :D I Look forward to reading and posting.

Wendy

Personal Best
12.1 @116 1.69 60' big 16 FWD
11.8 @113 1.56 60' big 16 AWD

[ITS A 7]

Welcome, have any pictures of the cars? Glad to see someone else building a fwd. Care to share other info on your setups?

[yucki]

It is nice to see some people close to home here. I am in SC, my wife and I love to take my gsx out to some of the local tracks. What tracks do you like to run at?

[girlieracr4g63]

Welcome, have any pictures of the cars? Glad to see someone else building a fwd. Care to share other info on your setups?


Stock bottom end, 2g head with Ti spring and retainers, Fp2's, now a E316g w/ tial 38mm external gate off o2, Buschur FMIC w/ tial 50mm BOV, denso 720 injectors, safcII, PLX wideband, GM maf and translator, EPROM ECU with 720 chip. I have used TMO to tune with but I am going to step up to DSMLINK V3
since all my tuning is from the dinosaur ages and by the seat of my ass even though it worked. ;) That's about it minus weight reductions, welds with some M&H's and some suspension stuff. I have a few tweaks in mind for this year, but no changes yet. I will keep you posted on the progress, and thank you for the welcome guys.

As for the tracks. I run at Coastal Plains in Jacksonville, Fayetteville, and Rockingham for now. They are our closest 1/4 tracks.


Wendy

[LadyVR4]

Welcome, It's always nice to see another lady on here and behind the wheel of a race car.

[yucki]

My car is in fayetteville NC right now. It is down because of a clutch issue. I ran at Fayetteville last weekend. I will shoot you a message next time we go up and put a clutch in the car. Maybe we can get together at the track.

[John Wigger]

What is left from getting the FWD running?

[girlieracr4g63]

Yucki that sounds like a plan! :)

John... Just gotta basically put the turbo on, and a few odds and ends. Nothing major just gotta order link. ugggg Did you get your car done?

[John Wigger]

Motor is in, trans is in, axles, transfer case, rear end, turbo, intake, now onto wiring. I still have a lot of work to do. I had to go pull my old built motor from the black car out to get brackets off of it and find a place to store it that took some time.

Look forward to seeing you run yours again.

[girlieracr4g63]

Motor is in, trans is in, axles, transfer case, rear end, turbo, intake, now onto wiring. I still have a lot of work to do. I had to go pull my old built motor from the black car out to get brackets off of it and find a place to store it that took some time.

Look forward to seeing you run yours again.

Im sure yours will be in the single digits this go round. That is one nasty turbo set up you have. Will you still be running a 5 speed or have you decided to run the auto now?

Good luck! See you at the track.

Wendy

[John Wigger]

Its being built to do 220 plus in the standing mile and to have some fun at the drag strip, an auto would be out of gear in the mile its a 5 speed.

[DSSA]

Hi guys just figured I drop in and say hello, and that I love the site so far. My name is Wendy, and I have been into DSM's for several years now.

No Helen = No Care :gasthrower:

[girlieracr4g63]

No Helen = No Care :gasthrower:

Hahaha awww this is Wendy errrr ummmm I mean Helen. You are seriously still making me feel bad about that... :(
Love ya mean it! :p You can kick me in the butt in Jersey in a few weeks. lol


Wendy